Filter
Top Products
Chapter 4 Recording and Playback
4-10 Chapter 4 Recording and Playback
4-2 Playback
2 When the adjustment is completed, release the
PLAY button.
The tape transport returns to normal speed, and the
SERVO indicator comes on again.
To perform continuous capstan override
playback
1 Set setup menu item 111 (TSO PLAY) to TSO.
2 Hold down the DMC EDIT button and turn the
MULTI CONTROL knob to select the playback
speed.
The selected playback speed is displayed in time
data display area 2 on the lower control
panel of this unit as well as in the character
information display on the monitor screen.
3 Press the PLAY button while holding down the
DMC EDIT button.
4 Press the PLAY button or perform any other
operation to exit the tape speed override mode.
See Section 12-2 “Setup Menu Operations” (page 12-2) for
details of setup menu operations.
For details of character information displayed on the video
monitor screen, see the descriptions of F4 (CHARA) in
function menu page 4 (page 11-7) and setup menu item 005
(page 12-5).
Z
32