Filter
Top Products
master page=left
8
KV-21CT1U_Grp U5_GB
4-093-927-52(1)
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV
enabling you to: 1) choose the language of the menu screen, 2) search and store all available
channels (TV Broadcast), 3) change the order in which the channels (TV Broadcast) appear
on the screen and 4) adjust the picture slant (only for KV-21CT1U).
However, if you need to change any of these settings at a later date, you can do that by
selecting the appropriate option in the (Set Up) or (Channel Set Up) menu.
1 Connect the TV plug to the mains socket (220-240V AC, 50Hz).
Press ! On/Off button on the TV set to switch on the TV. The
first time you switch on the TV, a Language menu displays
automatically on the TV screen.
2 Press 2 +/– button on the top control panel to select the language,
then press t to confirm your selection. From now on all menus
will appear in the selected language.
3 Ensure the aerial is connected as instructed, then press t to
confirm. The TV automatically starts searching and storing all
available broadcast channels for you.
• This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise automatic tuning
will not be completed.
• If no channels were found during the auto tuning process, a
new menu appears automatically on the screen asking you
to connect the aerial. Please connect the aerial (see page 7)
and press t. The auto tuning process will start again.
Language
Svenska
English
Nederlands
Français
Select language
Norsk
Confirm
[
t
]
Select
[
–
2+
]
Do you want to start automatic
First please connect aerial
tuning?
No
Initial Set Up
Yes
Select
[
–
2+
]
Confirm
[
t
]
Auto Tuning
No channel found
Please connect aerial
OK
Confirm
[
t
]
End
[
MENU
]
First Time Operation
02GBKV21CT1U.fm Page 8 Thursday, July 3, 2003 9:57 AM