Filter
Top Products
– 6 –
SECTION 2
DISASSEMBLY
2-1. CABINET REMOVAL
1Front cabinet
assy
2Channel
button
3 B board
5T board
4A board
1Screw
(+P2 x 10)
7Rear cabinet assy
8Battery cover
Claw
1. Remove battery cover 8.
2. Push the two hooks in the lower section of the rear cabinet with
a pint and the like to undo them.
Hooks
3. While pressing the rear cabinet, undo hooks on the periphery.
4. Insert a pin into the upper side of the cabinet, and while push-
ing the hook, tilt the pin to the rear cabinet side.
5. Remove the channel button 2.
6. Remove the speaker cord from the connector.
7. Remove B board 3 and A board 4.
8. Remove one screw 6 (+P x 10) from T board 5.
9. Remove T board 5 from the hooks (one each on both side) on
the rear cabinet.
Front cabinet
Rear cabinet