Filter
Top Products
7
FWD-50PX1
Code Table (1-a)
[a]Function [b]Range/Switch Code Command
Control Enquiry Standby Power On
0x12 Remote Only 0x00 OFF Yes Yes Disable Enable
0x01 ON
0x13 Energy Saving 0x00 Standard Yes Yes Disable Enable
0x01 Reduce
0x14 Speaker Out 0x00 ON Yes Yes Disable Enable
0x01 OFF
0x16 HD Mode 0x00 1080i Yes Yes Disable Enable
0x01 1035i
0x17 RGB Mode 0x00 DTV Yes Yes Disable Enable
0x01 PC
0x18 Sync Mode 0x00 H/Comp Yes Yes Disable Enable
0x01 Video
0x19 Menu Key 0x00 ON/OFF Yes Yes Disable Enable
0x01 RETURN
0x1B Clock Display 0x00 OFF Yes Yes Disable Enable
0x01 ON
0x40 All White 0x00 OFF Yes Yes Disable Enable
0x01 ON
0x41 BackGround 0x00 Gray Yes Yes Disable Enable
0x01 Dark Gray
0x02 Black
* This is enabled when Clock Display is set to ON. When Display is set to OFF, Status Display is also set to OFF.
IP Address
Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum
Enquiry 0x83 0x00 0x42 0x05 Address 0 Address 1 Address 2 Address 3 0xXX
0x00-0xFF 0x00-0xFF 0x00-0xFF 0x00-0xFF
Answer Header Answer Check Sum
Enquiry 0x70 0x00 0x70 Completed
0x70 0x03 0x73 Command Canceled
Example of IP Address setting
192. 128. 14. 1 → 192 (0xC0) Address 0
128 (0x80) Address 1
14 (0x0E) Address 2
1 (0x01) Address 3
* IP Address command can be carried out even in the standby state.