Filter
Top Products
Getting Started
10
3 Connect LINE-1 (TV) on the VCR and
the EURO-AV (Scart) connector on the
TV with the optional EURO-AV cable.
This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press … TV/
VIDEO to display the VIDEO indicator
in the display window.
4 Connect the mains lead to the mains.
Note
• If the TV is connected to the LINE-1 (TV) connector, setting the RF MODULATOR in
the OPTIONS-2 menu to OFF is recommended. In the OFF position, only the signal
from the aerial is output through the AERIAL OUT connector (see page 59). You do
not have to tune your TV to the VCR. Skip “Tuning your TV to the VCR” on page
12.
About the SMARTLINK features
If the connected TV complies with SMARTLINK,
MEGALOGIC
*1
, EASYLINK
*2
, Q-Link
*3
, or EURO
VIEW LINK
*4
, you can use the SMARTLINK
function after you complete the steps on the
previous page (the SMARTLINK indicator appears in the VCR’s display window
when you turn on the TV). You can enjoy the following SMARTLINK features.
• Preset Download
You can download your TV tuner preset data to this VCR and tune the VCR
according to that data in Auto Set Up. This greatly simplifies the Auto Set Up
procedure. Be careful, not to disconnect the cables or exit the Auto Set Up function
during the procedure.
See “Setting up the VCR with the Auto Set Up function” on page 14.
Step 3 : Connecting the VCR (continued)
SMARTLINK