Filter
Top Products
21
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2681273121HTP36SS_GB\2681273121\GB03CON_HTP-
36SS-CEL.fm
masterpage: Right
Getting Started
model name1[HTP-36SS]
2-681-273-12 (1)
Tips
•You can also fix the optimizer microphone to a
tripod (not supplied) and place the tripod at your
listening position.
•Be sure to remove any obstacles in the path
between the optimizer microphone and the
speakers.
•When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.
Press AUTO CAL.
The following appears on the display.
A.CAL [5] t A.CAL [4] t A.CAL [3] t
A.CAL [2] t A.CAL [1]
The table below shows the display when
measurement starts.
* The corresponding speaker indicator lights up in
the display during measurement.
When measurement ends, “COMPLETE”
appears on the display and the settings are
registered.
Notes
•Auto Calibration cannot detect the sub woofer.
Therefore, all sub woofer settings will be
maintained.
•The measurement process will take a few minutes
to complete.
Tips
•When Auto Calibration starts:
– Stand some distance from the speakers and the
listening position to avoid measurement failure.
This is because test signals are output from the
speakers during measurement.
– Avoid making noise to get a more accurate
measurement.
•The Auto Calibration function will be canceled
when you do the following during the
measurement process:
– Press ?/1 or MUTING.
– Press input buttons on the remote or INPUT
SELECTOR on the receiver.
– Change the volume level.
– Press AUTO CAL again.
Performing Auto Calibration
123
46
78
0/10
ENTER
9
SYSTEM STANDBY
TV/VIDEO
SLEEP
AUTO
CAL
AV
?/1
VIDEO 1 VIDEO 2 DVD SA-CD/CD
2CH A.F.D.
RETURN/EXIT MENU
MOVIE MUSIC
MEMORY DVD MENU
CLEAR
TOOLSDISPLAY
MUTING
TV VOL
MASTER VOL
FM MODE
D.TUNING
D.SKIP
DUAL MONO
TUNER
AMP MENU
TV
?/1
?/1
>10/
-
F
Gg
f
5
AUTO
CAL
Control
button
MUTING
Input
buttons
?/1
switch
MASTE
R
VOL +/–
Measurement for Display
Environment noise level NOISE.CHK
Speaker connection MEASURE and SP
DET. appears
alternately*
Speaker level MEASURE and
GAIN appears
alternately*
Speaker distance MEASURE and
DISTANCE appears
alternately*
GB01COV_HTP-36SS-CEL.book Page 21 Friday, March 17, 2006 2:27 PM