Filter
Top Products
ICD-UX70/UX80 GB 3-274-295-12(1)
49
GB
Troubleshooting
Troubleshooting
Troubleshooting
Before taking the IC recorder for repair, check the following sections. Should any
problem persist after you have made these checks, consult your nearest Sony dealer.
Symptom Remedy
The IC recorder cannot be
turned on.
The HOLD switch is set. Slide the HOLD switch in the direction
opposite that of the arrow.
The IC recorder does not
operate.
The battery has been inserted with incorrect polarity (page 11).
The battery is weak (page 12).
The buttons are locked with the HOLD switch (page 8).
No sound comes from the
speaker.
The volume is turned down completely (page 23).
Headphones are plugged in (page 24).
Sound comes from the
speaker even when the
headphones are plugged
in.
If you plug in the headphones not securely during playback,
the sound may come from the speaker. Unplug the
headphones and then insert them securely.
The operation indicator
does not light.
“LED” is set to “OFF” (page 38). Display the menu and set “LED”
to “ON”.
“MEMORY FULL” is
displayed and you cannot
start recording.
The memory is full. Erase some of the messages (page 29) or
erase all the messages after you store them on your computer.