Filter
Top Products
4-4 Using the Remote Commander
Chapter 4 Playback
4-8 Chapter 4 Playback
2 Turn the JOG/SHUTTLE dial to change the setting
from “OFF” to “ON” while holding down the JOG/
SHUTTLE button, and then release the JOG/
SHUTTLE button.
(ON flashes while the JOG/SHUTTLE button is
being pressed.)
3 Press the SET/MENU button.
Time data display area and monitor go back to the
original views.
Note
When two or more J-H1s or J-H3s are placed close to
each other, the Remote Commander may affect more
than one unit. In this case, select OFF in WIRELESS
REMOTE CONTROL, extended menu item 213, of
the other units you do not want to operate.
Unit
Operating the Remote Commander
Press the function keys while pointing the infrared
transmitter of the Remote Commander at the remote
control detector.
Each key functions same as the corresponding key on
the control panel attached to the unit.
Note
For the SEARCH key, is 5 times forward speed,
is 5 times reverse speed.
Items without ❉ are omitted.
Remote control detector
Infrared transmitter
Remote
Commander
Time data display
Monitor screen
REMOTE INTERFACE
137
213:WIRELESS-on
501
❉