Filter
Top Products
Connecting the TV
23
Connecting the TV
KDF-E42A10/KDF-E50A10
2-597-544-12(1)
D:\WINNT\Profiles\noriko\Desktop\Troy EN2\2597544121\01US04INS.fm
masterpage:3 columns Right
Cable Box and
Antenna
For best results, use this connection if:
❑
Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
❑ You do not have a VCR. (If you have a VCR, see pages 34 and 35.)
With this connection you can:
❑
Use the TV’s remote control to change channels coming through the
cable box to the TV’s CABLE input. (You must first program the
remote control for your specific cable box; see “Programming the
Remote Control” on page 47.)
❑ Use the TV’s remote control to change channels coming directly into
the TV’s VHF/UHF input jack.
Notes on Using This Connection
Before connecting a cable
box, see “Using
CableCARD Device” on
page 30.
IN OUT
VHF/UH
F
CABLE
CATV cable
Rear of TV
Cable box
Coaxial
cable
Antenna
cable
To Do This ... Do This ...
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
Set up the TV remote control to operate the cable
box
Program the remote control. See “Programming the Remote
Control” on page 47.
Activate the remote control to operate the cable
box
Press SAT/CABLE (FUNCTION) once, and the SAT/CABLE
indicator lights up.
Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the
channel that the cable box is set to (usually channel 3 or 4).
Switch
the TV’s input between the cable box and
antenna
Press ANT to switch back and forth between the TV’s VHF/UHF
(scrambled channels) and CABLE (unscrambled) inputs.