Sony KDL-26T30xx Flat Panel Television User Manual


 
8
GB
Safety information
Installation/Set-up
Install and use the TV set in accordance with the
instructions below in order to avoid any risk of fire,
electrical shock or damage and/or injuries.
Installation
The TV set should be installed near an easily accessible
mains socket.
Place the TV set on a stable, level surface.
Only qualified service personnel should carry out wall
installations.
For safety reasons, it is strongly recommended that you
use Sony accessories, including:
Wall-mount bracket SU-WL100
Transporting
Before transporting the TV set,
disconnect all cables.
When transporting the TV set by
hand, hold it as shown on the right.
When lifting or moving the TV set,
hold it firmly from the bottom. Do
not put stress on the LCD panel.
When transporting the TV set, do
not subject it to jolts or excessive
vibration.
When transporting the TV set for repairs or when moving,
pack it using the original carton and packing material.
Ventilation
Never cover the ventilation holes or insert anything in the
cabinet.
Leave space around the TV set as shown below.
It is strongly recommended that you use a Sony wall-
mount bracket in order to provide adequate air-circulation.
Installed on the wall
Installed with stand
To ensure proper ventilation and prevent the collection of
dirt or dust:
Do not lay the TV set flat, install upside down,
backwards, or sideways.
Do not place the TV set on a shelf, rug, bed or in a
closet.
Do not cover the TV set with a cloth, such as curtains,
or items such as newspapers, etc.
Do not install the TV set as shown below.
Mains lead
Handle the mains lead and socket as follows in order
to avoid any risk of fire, electrical shock or damage
and/or injuries:
Use only Sony mains leads, not those of other brands.
Insert the plug fully into the mains socket.
Operate the TV set on a 220-240 V AC supply only.
When wiring cables, be sure to unplug the mains lead
for your safety and care not to catch your feet on the
cables.
Disconnect the mains lead from the mains socket before
working on or moving the TV set.
Keep the mains lead away from heat sources.
Unplug the mains plug and clean it regularly. If the plug
is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Notes
Do not use the supplied mains lead on any other
equipment.
Do not pinch, bend, or twist the mains lead excessively.
The core conductors may be exposed or broken.
Do not modify the mains lead.
Do not put anything heavy on the mains lead.
Do not pull on the mains lead itself when disconnecting
the mains lead.
30 cm
10 cm
10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm10 cm
6 cm
Leave at least this space around the set.
Air circulation
is blocked.
Air circulation
is blocked.
Wall
Wall