Filter
Top Products
6
GB
Performing the initial set-up
1 Connect the TV to your AC power
outlet (mains socket).
2 For KDL-55/46/40/32EX713 and
KDL-60/52/46/40/32EX703, check the
ENERGY SAVING SWITCH setting
is on (
z).
3 Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
Follow the instructions on the screen.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your cable
provider. If no channel is found using
“Quick Scan”, try “Full Scan” (though it
may take some time).
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1 Press F/f to select the channel you want
to move to a new position, then press .
2 Press F/f to select the new position for
the channel, then press .
~
• You can also tune channels manually.
Detaching the Table-Top
Stand from the TV
Remove the screws guided by the arrow marks
of the TV.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• Do not hold by the stand rear cover while carrying
the Table-Top Stand to prevent dropping the stand
which may cause an injury or damage to the
property.
4
KDL-55/46/40/
32EX713 and
KDL-60/52/46/
40/32EX703 only