Filter
Top Products
Basic Operations
21
Basic Operations
Changing the Wide Screen Mode
qd WIDE Press repeatedly to step through the Wide Mode settings:
Wide Zoom, Normal, Full, Zoom. The Wide Mode settings
can be also accessed in the Screen settings. See page 29.
4:3 Original source
Standard definition source
16:9 Original source
High definition source
mm
Wide Zoom Wide Zoom
Normal Normal
This mode is not available
Full Full
Zoom Zoom
When the TV receives a 720p or 1080i signal,
Normal cannot be selected.
qf DISPLAY Press once to display the current channel number, channel
label, time and Wide Mode settings. The OSD (on screen
display) will turn off after a few seconds or press again to
immediately turn off the display.
qg V/v/B/b Press V/v/B/b to move the on-screen cursor. Press to
select/confirm an item.
qh TOOLS Press to display the Tools Menu that is associated with your
current input: Analog TV, Digital TV, or External Inputs (with
the exception of PC input). (See page 26, 28, 31, 36 and 37.)
qj JUMP Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel that
was selected.
qk 0 - 9 ENT Press 0 - 9 to select a channel; the channel changes after two
seconds. Press ENT to change channels immediately.
ql CH +/– Press to scan through channels. To scan quickly through
channels, press and hold down either +/–.
Button Description
qg
qf
qk
qh
qj
ql
qa
qa
qd
Insert two size AA batteries (supplied) by matching the e and E
on the batteries to the diagram inside the remote control’s battery
compartment.
(see
page 29 for details)