Sony KDL-37V55/56XX Flat Panel Television User Manual


 
C:\Documents and Settings\Dolors\Mis documentos\2009\EX2L_CORREC
PARAL\11_UK_EX2L\090MEN.fm
masterpage:Left
34
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Light Sensor Automatically optimises the picture settings according to the ambient light in the
room.
~
Do not put anything over the sensor, doing so may affect its function. Check the
position of the sensor (page 14).
Picture
Target Inputs Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.
Common Applies common settings to all inputs in which “Target
Inputs” is set to “Common”.
Name of current
input (e.g. AV1)
Allows you to make custom settings for the input.
Picture Mode Sets a picture mode. The options that can be selected differ depending on the scene
select settings.
Vivid Enhances picture contrast and sharpness.
Standard For standard pictures. Recommended for home
entertainment.
Custom Allows you to store your preferred settings.
Cinema For viewing film-based content. Most suitable when viewing
the TV in a theatre-like environment.
Photo-Vivid For viewing photographs. Enhances picture contrast and
sharpness.
Photo-Standard For viewing photographs. Provides the optimum picture
quality for viewing in the home.
Photo-Original For viewing photographs. Represents the picture quality used
when imaging developed photographs.
Photo-Custom For viewing photographs. Allows you to store your preferred
settings.
Sports Provides the optimum picture quality for viewing sports.
Game Most suitable for when playing games on your TV.
Graphics Provides the optimum picture quality for viewing graphics.
Reset Resets all the “Picture” settings to the factory settings excluding “Target Inputs”,
“Picture Mode” and “Advanced Settings”.
Backlight Adjusts the brightness of the backlight.
Contrast Increases or decreases picture contrast.
Brightness Brightens or darkens the picture.
Colour Increases or decreases colour intensity.
Hue Increases or decreases the green tones and red tones.
~
“Hue” can be adjusted only for the NTSC colour signal (e.g. U.S.A. video tapes).
010COV.book Page 34 Tuesday, January 20, 2009 5:15 PM