Sony KDL-40EX501 Flat Panel Television User Manual


 
47
Other Information
Using a Wall-Mount Bracket
Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as
packaged. Some larger size TV may require removing the Table-Top Stand; refer to the
instructions provided with the TV.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that you use the Wall-
Mount Bracket designed for your TV and the installation should be performed by a Sony
dealer or licensed contractor.
Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV’s weight.
Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the mounting
hooks to the TV set. (Do not use the screws that are intended for the Table-Top Stand
attachment.)
The supplied M6 screws are designed so that they are 8 mm to 12 mm in length when measured
from the attaching surface of the mounting hook.
Use of screws other than those supplied with the bracket may result in internal damage to the TV
set or cause it to fall, etc.
Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to
attach the Table-Top Stand. Keep the screws away from small children.
Installing the Wall-Mount Bracket
To Customers
Your TV can be wall-mounted using SU-WL500 Wall-Mount Bracket (sold separately).
Please provide this installation information as well as the instruction supplied with SU-WL500
Wall-Mount Bracket to your installer.
To Sony Dealers and Licensed Contractors
To avoid injury and property damage, read these instructions carefully. Periodic inspection and
maintenance is highly recommended to ensure that TV is securely mounted.
8-12 mm
M6 Screw (supplied with the Wall-Mount Bracket)
Mounting Hook
Rear of the TV set
• Read the supplied Safety Booklet for additional safety information.
(Continued)