Filter
Top Products
25
US
US
D:\SONY TV\DONE-
ForUpdateTM\Batch_01_Feb2015\SY140240_SE2N_UC2_IM\4562279111_US\07
0MEN.fm
masterpage: Left
KDL-48R550C /48R530C / 48R510C / 40R550C / 40R530C / 40R510C / 32R500C
4-562-279-11(1)
Sound
Sound Mode
Select according to content you want
to enjoy.
Reset
Reset [Equalizer], [Clear Voice],
[Steady Sound], [Balance] and
[Volume Offset] settings.
Equalizer
Adjusts sound frequency settings.
Clear Voice
Makes voices sound clearer.
Steady Sound
Select [On] to stabilize the volume
across all programs and commercials.
Select [Off] to disable this function.
Balance
Emphasizes left or right speaker
balance.
Volume Offset
Adjusts the volume level of the
current input relative to other inputs.
MTS Audio
Enjoy stereo, bilingual and mono
programs.
Stereo: Select for stereo reception
when viewing a program
broadcast in stereo.
Auto SAP: Select to automatically
switch the TV to second audio
programs when a signal is
received. If no SAP signal is
present, the TV remains in
[Stereo] mode.
Mono: Select for mono reception.
Use to reduce noise during weak
stereo broadcasts.
Alternate Audio
Digital channels only.
Select among the available
options to switch among the
alternate audio streams. The
program you are tuned to may be
broadcasted in a different
language in the alternate audio
streams.
Advanced Settings
Dynamic Range: Compensates for
differences in the audio level
between different channels.
Note
• The effect may not function or may vary
depending on the program regardless of
the [Dynamic Range] setting.
HE-AAC Audio Level: Adjust the
HE-AAC audio sound level.
MPEG Audio Level: Adjusts the
MPEG audio sound level.
Screen
Wide Mode
For details about wide mode, see
page 18.
Auto Wide
Automatically changes the wide
mode according to the input signal
from an external equipment. To keep
your setting, select [Off].
Hint
• Even if [Auto Wide] is set to [On] or [Off],
you can always modify the format of the
screen by pressing WIDE repeatedly.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts
the display area based upon the
content or [Off] to choose from the
[Display Area] options.
Display Area
Adjusts the picture display area.