Filter
Top Products
C:\Documents and Settings\Dolors\Mis documentos\2009\EX2L_CORREC
PARAL\11_UK_EX2L\100ADD.fm
masterpage:Left
54
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Some input sources cannot be
selected.
• Select “AV Preset” and cancel the “Skip” setting for the input source
(page 39).
The remote does not function. • Replace the batteries.
You have a blank TV listings
in the GUIDE Plus+ System
• Check the aerial/cable connection.
• Your cabling and set-up is OK, but your GUIDE Plus+ System was not
connected for enough time to receive TV listings data. Leave the TV
“STANDBY” overnight (24 hours) or use “Manual Data Download”
(page 19) .
• You live in a country/region where the GUIDE Plus+ System is not yet
available. Check the list of countries to see if you are in a region that is
supported.
http://www.europe.guideplus.com/
HDMI equipment does not
appear on “HDMI Device
List”.
• Check that your equipment is compatible with Control for HDMI.
You cannot select “Off” in
“Control for HDMI”.
• If you have connected any audio system that is compatible with Control
for HDMI, you cannot select “Off” in this menu. If you want to change
the audio output to the TV speaker, select “TV Speaker” in the
“Speaker” menu (page 38).
Not all channels are tuned for
cable.
• Check the support website for cable provide information.
http://support.sony-europe.com/TV/DVBC/
Condition Explanation/Solution
010COV.book Page 54 Tuesday, January 20, 2009 5:15 PM