Filter
Top Products
31
Using the TV Features
Using P&P and PIP Features
This TV comes with the P&P and PIP features
which allow you to view two pictures
simultaneously. P&P (picture and picture)
provides two windows side by side. PIP (picture in
picture) provides PC input signal and TV
channels.
~
• The VHF/UHF/CABLE input must be connected to
use the PIP feature.
•For the PIP feature, Closed Caption (CC) is not
available.
P&P
PIP
1 Press OPTIONS to display the OPTIONS
menu while watching one of the following
inputs: TV channels, Video, Component,
HDMI or PC.
2 Press V/v to highlight P&P or PIP, and press
to display the sub window.
~
• To swap audio in P&P mode, use the B/b button to
swap the highlight between the main window and sub
window.
• To swap audio in PIP mode, press OPTIONS, then
press V/v to highlight Audio Swap.
• 1080p signal cannot be displayed for Component 1/2
in the sub window in P&P mode.
• For compatible PC Timings, refer to the PC Input
Reference Chart (see page 16).
Press B/b to highlight the window to change, and
press INPUT to select the input to watch, or press
CH +/
– to change channels or enter the channel
number using the 0-9 numeric buttons.
~
• You may also press JUMP to change channels.
• Inputs with Skip applied will not appear in the list of
External Inputs (see page 44 for External Inputs
settings).
Press B/b to highlight the window, and press V/v
to change the window size.
1 Press OPTIONS to display the OPTIONS
menu.
2 Press V/v to highlight Exit P&P or Exit PIP
(depends on the mode you are in), and press
to exit.
~
• You may also press RETURN while in these features
to exit.
• Additional compatible device with television tuner is
required to watch two simultaneous live television
program.
To Display the Sub Window
P&P Availability
In main window In sub window
Video 1/2/3
Component 1/2
HDMI IN 1/2/3 (except PC
timing)
TV Channel
(VHF/UHF/
CABLE IN)
Video 1/2/3
Component 1/2
PIP Availability
In main window In sub window
PC
HDMI IN 1/2/3 (PC timing)
TV Channel
(VHF/UHF/
CABLE IN)
Main window
Sub window
Main window
(PC)
Sub window
(Location of
the sub
window can
be moved by
pressing
V/v/B/b.)
To Change Inputs or Channels in the
Window
To Change the Window Size of P&P
To Exit from P&P and PIP