Sony KDL-46EX500 Flat Panel Television User Manual


 
18
Running Initial Setup
During initial setup, you will perform the following:
Set the language for the On Screen Display (OSD) text
Choose your viewing environment
Scan for digital and analog channels
Complete your cable connections before beginning the Initial Setup. Refer to the Quick Setup
Guide (supplied) for sample connection diagrams.
3 Auto Program will scan for available channels from the signal source directly connected to
the TV’s CABLE/ANTENNA input. Follow the help text provided on the screen to run the
Auto Program.
1 Turn on the TV. The Initial Setup screen will
appear.
2 Use the remote control buttons described below to
navigate through the Initial Setup.
V/v/B/b buttons:
Allow you to navigate and highlight options where applicable.
button:
Allows you to select the highlighted option and advance to the next screen.
ConfirmConfirm
Please select your language:
English
Español
Français
Initial Setup
ConfirmConfirm
When prompted to select Retail or Home, be sure to select
Home for ENERGY STAR compliant mode.
Select Cancel to stop or cancel the Auto Program. The Auto
Program can be done at later time. To run Auto Program at a
later time, press MENU, select Settings, and then select Auto
Program under Channel settings.
Connect either your cable or antenna to the TV (you can connect
both using an A-B RF switch (not supplied)); for more details see
page 11.
Select your preferred aspect ratio for the screen display. Press
WIDE
to select
Wide Mode
, or press
MENU
and select
Settings
, and then set
Auto Wide
to
On
under the
Screen
settings. For more
details, see page 27.
Please select the type of use for this TV.
"Retail" optimizes the picture for store display.
"Home" optimizes the picture for normal home
use and is Energy Star compliant.
Retail
Home
Initial Setup
ConfirmConfirm
RETURN
Back