Filter
Top Products
49
Other Information
CAUTION
The wall that the TV will be installed on should be capable of supporting a weight of at least four
times that of the TV. Refer to your TV’s operating instructions for its weight.
Step 3: Installing the Base Bracket on the wall
Refer to the Instructions for SU-WL500.
Step 4: Preparing the TV for wall mount installation
Follow the steps below to prepare for installing the TV.
1 Disconnect all the cables from the TV.
2 Secure the Mounting Hook to the rear of the TV.
Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to
the “Screw and Hook Locations Diagram/Table” shown below.
1 Secure the Mounting Hooks to the rear of the TV using only the supplied screws
(M6 × 16).
2 Be sure to tighten the screws with equal torque strength.
Screw and Hook Locations Diagram/Table
TV Model Screw location Hook location
KDL-32EX600 f, j c
KDL-40EX600 e, j b
KDL-46EX600 e, j b
Mounting Hook
Screw
(M6 ×
16)
Square
hole
Square
hole
Align the tab
on the rear of
the Mounting
Hook with the
square hole
on the rear of
the TV as
illustrated.
Tab
(Continued)