Filter
Top Products
5
GB
Start-up Guide
2: Attaching the stand
1 Take out the stand, screws, and packaging
material to begin stand setup.
2 Set the packaging material as shown.
3 Place the TV directly to the stand as
shown.
After placing the TV on the stand, remove the
packaging material.
4 Fix the TV to the stand using the supplied
screws.
Notes
• This TV is very heavy, so two or more people should place
the TV on the stand.
• If using an electric screwdriver, set the tightening torque
at approximately 1.5 N·m (15 Kgf·cm).
Packaging material
1
2
Packaging material
Stand
4
3
90°