Filter
Top Products
5
GB
Start-up Guide
2: Attaching the stand
(only for KDL-40X2000)
1 Place the TV onto the stand by aligning the
screw hole alignment lines over the stand
as shown.
2 Fix the TV to the stand using the supplied
screws.
Notes
• This TV is very heavy, so two or more people should place
the TV on the stand.
• If using an electric drill, set the tightening torque at
approximately 1.5 N·m (15 Kgf·cm).
3: Connecting an aerial/
VCR
1
2
2
Connecting an aerial only
Connecting an aerial and VCR
Coaxial cable
(supplied)
Mains lead (supplied)
Scart lead (not supplied)
VCR
Mains lead
(supplied)
Coaxial cable
(not supplied)
Coaxial cable
(supplied)