Filter
Top Products
D:\TV's JOB\SONY TV\SY12007_A5 (Rev-3)\4411951131_GB\GB03STU.fm
KDL-HX750/HX753/EX650/EX653/EX65A/EX550
4-411-951-13(1)
Getting Started
7
GB
1: Attaching the
Table-Top
Stand
Refer to the supplied Table-Top Stand leaflet for
proper attachment.
1 Place the TV set on the Table-Top Stand.
KDL-55/46/40/32HX75x,
KDL-46/40/32EX65x, KDL-32EX550
~
• Align the TV from the top, slide it in until the
guide pins cannot be seen.
KDL-26EX550
2 Fix the TV to the Table-Top Stand using the
supplied screws. The arrow marks
indicate the location of the screw holes used
for securing the Table-Top Stand.
KDL-55/46/40/32HX75x,
KDL-46/40/32EX65x, KDL-32EX550
KDL-26EX550
~
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 2.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
Guide
pins
Detaching the Table-Top
Stand from the TV