Sony KDL-60EX720 Flat Panel Television User Manual


 
17
D:\Cmeng's JOB\SONY TV\SY0311_W9 (Rev-1)\4275462121_US\US03STU.fm
KDL-EX729/EX723/EX720/EX621/EX620/HX729
4-275-462-12(1)
Getting Started
6: Running initial setup
1 Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest
power outlet.
2 Press 1 (power) on the TV. The "
(power) indicator will light green.
When you switch the TV on for the
first time, the Language menu
appears on the screen.
~
When you turn on the TV for the first time, the
TV requires some internal processing for
optimization before you can perform the initial
setup. There will be no picture and sound, and
the timer indicator on the front of the TV
blinks orange for about 40 seconds. Do not turn
off the TV during this process. This process
has been completed at the factory on some
TVs.
Follow the instructions on the screen.
~
Home mode sets the TV to settings optimized
for home viewing (this setting is ENERGY
STAR compliant).
4 Select Continue to scan for
available channels and enable the
Rovi On Screen Guide™ feature.
If you receive channels from a cable
box or satellite receiver and do not
wish to use the TV’s built-in tuner,
select Skip.
Selecting Skip will disable the Rovi
On Screen Guide feature, which
is only available when the TV’s
tuner is used.
~
If you skip the channel scan while in the setup
menus, Rovi On Screen Guide will be disabled.
Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of
the box as packaged. If the Table-Top Stand
is attached to the TV, the TV may require
detaching the Table-Top Stand; see
“Detaching the Table-Top Stand from the
TV” (page 11).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
3
(Continued)