Sony KDL-60EX723 Flat Panel Television User Manual


 
10
D:\Cmeng's JOB\SONY TV\SY0311_W9 (Rev-1)\4275462121_US\US03STU.fm
KDL-EX729/EX723/EX720/EX621/EX620/HX729
4-275-462-12(1)
1: Attaching the Table-Top
Stand
Refer to the supplied Table-Top Stand
instruction leaflet for proper attachment.
~
Do not put stress on the LCD panel or the
frame around the screen.
Be careful to not pinch your hands or the AC
power cord when you install the TV unit to the
Table-Top Stand.
For KDL-55/46HX72x,
KDL-55/46/40/32EX72x and
KDL-55/46/40EX62x
1 Place the TV unit on the Table-Top
Stand.
~
Align the TV from the top, slide it in until the
guide pins cannot be seen.
2 Use the supplied screws to attach the
TV unit to the Table-Top Stand.
~
If you use an electric screwdriver, set the
torque at approximately 1.5 N·m {15 kgf·cm}.
For KDL-60EX72x
1 Align with the two dowels of the
Table-Top Stand, and gently place
the TV, checking that the f mark is
facing the front.
2 Attach the TV and Table-Top Stand
with the supplied screw and hexagon
wrench.
~
Tighten to approximately 3 N·m {30 kgf·cm}.
Guide
pins
Neck
*
Head
* 3 N·m {30 kgf·cm}