Sony KDL70W850B Flat Panel Television User Manual


 
D:\SONY TV\SY130241_Clover 11\4489959111_US\US03STU.fm
KDL-70W850B/70W840B/70W830B/60W850B/60W840B
4-489-959-11(1)
11
US
US
3 Fix the TV to the Table-Top Stand using
the supplied screws. The arrow marks
indicate the location of the screw
holes used for securing the Table-Top
Stand.
~
If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
x Alternative (middle position)
You can change the Table-Top Stand from
the edge to the middle position by referring
to the instructions below.
1
2
To detach the Table-Top Stand from the TV,
remove the screws .
~
Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
Be sure the TV is vertical before turning on.
To avoid uneven picture uniformity do not
power on the TV with the LCD panel facing
down.
When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
Middle position
1
2
3
Thick cushion
Detaching the Table-Top
Stand from the TV
1
23