Filter
Top Products
KE-W50A10E
2-632-749-02
Using the Menu
31
GB
Do the following options.
1 Press OK to select “AV Preset”.
2 Press M/m to select the desired input source, then press OK.
3 Press M/m to select the desired option below, then press OK.
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- to select
the programme number with the channel. You cannot select a programme number that is set
to skip (page 33).
1 Press OK to select “Manual Programme Preset”.
2 Press M/m to select one of the following options, then press OK.
AV Preset
Option Description
Label Assigns a name to any equipment connected to the side or rear
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
Press M/m to select one of the following, then press OK.
Equipment labels: Uses one of these preset labels.
Edit: Creates your own label. Follow steps 3 to 5 of “Programme
Labels” (page 30).
Skip Skips an input source that is not connected to any equipment when
you press M/m to select the input source.
After selecting this option, press OK.
Manual Programme Preset
Continued
01GB-KLV40XUK.book Page 31 Thursday, July 7, 2005 2:10 PM