Filter
Top Products
32
Optional Connections
Optional Connections
Smartlink is a direct link between the TV set and a VCR.
For Smartlink you need:
• A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic.
Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.
• A fully-wired 21 pin SCART cable to connect your VCR to the Scart connector
:
3/
q
3
(SMARTLINK) on the rear of the TV set.
The features of Smartlink are:
• Tuning information such as the channel overview are downloaded from the TV set to the VCR.
• Direct recording: while watching TV you only need to press just one button on the VCR to
record this programme.
• Automatically switching on: with the TV set in standby mode, pressing the “Play
z
” button on
your VCR automatically switches the TV on.
If you have connected a decoder to a VCR which supports the Smartlink feature, select
the menu “Further Programme Preset” in the (Manual Set Up) menu and select
DECODER AV3
for each coded channel. For more details, please refer to the section
"Using the Further Programme Preset function" of this instruction manual.
For more information on Smartlink, please refer to the Instruction Manual of your
VCR.
Smartlink
Rear
VCR
Decoder
01GBKF50/42SX200U.fm Page 32 Tuesday, January 7, 2003 10:56 AM