Sony KLV-17HR3 Flat Panel Television User Manual


 
19
GB
Overview & Installation
Removing the Rear Cover
When you connect the rear cables, remove the rear cover of the TV set. Be sure to attach the rear cover back on the
TV set after you finish connecting the rear cables.
Make sure to disconnect side cables before removing the rear cover.
Removing the rear cover
Hold the rear cover as illustrated below and pull the lower part of the cover towards you first. Then, detach the upper
part of the cover from the TV set.
It is not necessary to remove the rear cover when you connect the side cables.
Attaching the rear cover
Hold the rear cover as illustrated below, fitting the four detents on the rear cover into the corresponding holes on the
TV set, then push the rear cover back on to the TV set.
It is not necessary to attach the rear cover if you install a wall-mount bracket SU-W100 (optional
accessory).