Filter
Top Products
Operations
32
-GB
Customizing the TV
Using the AV OUT (advanced rec-out)
terminal
You can select the output signal from the Ú (monitor/
TV output) jacks at the rear of the TV. However, the
signals of the PROGRAM INDEX, STROBE, PIP modes,
the signals from the (component video input)
jacks, and the Teletext broadcast cannot be output even
though MONITOR is selected.
1 Press MENU.
2 Press V or v to move the cursor (z) to the
FEATURES menu ( ), and press ENTER.
3 Press V or v to move the cursor (z) to AV
OUT, and press ENTER.
4 Press V/b/v/B to select the output signal,
and press ENTER.
Select To
TV Output the signal of the TV broadcast.
MONITOR Output the signal of the picture you are
watching as a main picture.
Notes
• Do not change the channel while recording with a VCR
through the Ú (monitor/TV output) jacks. If you change the
channel, it also changes the channel you are recording.
• When the signals from the
(component video input) jacks
are displayed on the main screen, the signals can't be output
even though MONITOR is selected.
A / V CONTROL
DYNAMIC
SOFT
STANDARD
PERSONAL
V IDEO ADJUST
AUDIO ADJUST
MENU
GAME MODE
HYPER SURROUND:
OFF
MONITOR
AV OUT:
FEATURES
ENTER ENTER
CONVERGENCE