Filter
Top Products
Getting Started
11
GB
MANUAL PROGRAMME
PRG
SYS
CH
1 C02 –––
LABEL AFT
2
3B/G
B/G
–– ON
a
OK
ndSelect press
B/G
B/G4
5
6
C04 ––––– ON
C06 ––––– – 3
C12 ––––– ON
S06 ––––– ON
S24 –––––
B/G
ON
D
–
–
–
–
–
–
B/G
Manual fine-tuning
Normally, the automatic fine-tuning (AFT) is already working. However, if
the picture of a programme is distorted, you can use the manual fine-
tuning function to obtain better picture reception.
1 Press MENU to display the main menu.
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and press
OK.
The PROGRAMME PRESET menu appears.
3 Move the cursor (z) to “MANUAL PROGRAMME” with + ◊ or – √ and
press OK.
The MANUAL PROGRAMME menu appears.
4 Using + ◊ or – √, move the cursor (z) to the programme position which
you want to manually fine-tune, and press OK repeatedly until the AFT
position turns red.
5 Fine-tune the channel while holding down + ◊ or – √ so that you get the
best TV reception. As you press these buttons, the frequency changes from
–15 to +15.
6 After fine-tuning, press OK.
The cursor (z) appears. The fine-tuned level is now stored.
7 Repeat steps 4 through 6 to fine-tune other channels.
8 Press MENU to return to the original screen.
MANUAL PROGRAMME
PRG
SYS
CH
1 C02 –––
LABEL AFT
2
3B/G
B/G
–– ON
a
OK
ndSelect press
B/G
B/G4
5
6
C04 ––––– ON
C06 ––––– ON
C12 ––––– ON
S06 ––––– ON
S24 –––––
B/G
ON
D
–
–
–
–
–
–
B/G
1
2
3
4
5
6
7
8
9
-/--
0
C
PROGR
PAUSE
PLAY
MENU
SLEEP
OK
ON
TIMER
SHOW VIEW
TIMER
ON SCREEN
TIMER REC
ON/OFF
TIMER REC
CLEAR
REC
QUICK
TIMER
TAPE
SPEED
COUNTER
RESET
REPLAY
INDEX SEARCH
REW
STOP
FF
To reactivate automatic fine-
tuning (AFT)
Repeat from the beginning and
select “ON” in step 5.