Sony KV-20FV300, KV-24FV300 CRT Television User Manual


 
Using the Menus
30
Using the Timer Menu
Current Time
Set your TV to the current day and time. Press
g to open Current Time
menu:
1 Use the
F or f button to enter the correct day and time, then press .
2 Press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing
Use your timer settings to program your TV by day, time, duration and
channel. The timers duration is maximum of 6 hours. When the channel
is fixed is not necessary to set the channel.
With the menu open, set the cursor on Timer 1 or Timer 2:
1 Press
F or f to select Timer 1 or Timer 2, then press .
2 Press
F or f to enter the desired day, time, duration and channel, then
press . The Timer status should be On when the Timer has been set.
3 Press to exit the menu.
To access the Timer menu, refer to the following steps:
To Display
To Highlight
To Select
Timer 1
:
Set
Timer 2
:
Set
Current Time
Timer
Move
Select
End
You must set the Current Time before you can use Timer 1 and Timer 2.
You can set the Timer to On, Off, or Set. Once the timer is set, you can turn it On or Off
without having to go through the settings. When you set Timer 1 or Timer 2, a red light on
the front panel of your TV will turn on.
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the
event of any loss of power, Current Time and Timer 1 and Timer 2 settings will be cleared.