Filter
Top Products
19
GB
•
Using Optional Equipment
1 Connect your equipment to the designated TV socket, as indicated in the previous page.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press the button repeatedly until the correct input
symbol appears on the screen.
4 Press the button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select 3 input signal using
the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual
Sound” “A” on the sound menu screen (see page 11).
Symbol Input Signals
1 Audio / video input signal through the scart connector C.
RGB input signal through the scart connector C. This symbol
appears only if a RGB source has been connected.
2 Audio / video input signal through the scart connector D.
2 S Video input signal through the scart connector D.
3 Video input signal through the phono socket A and audio input
signal through B.
S
Additional Information
2829cl11kGB.fm Page 19 Wednesday, January 7, 2004 5:04 PM