Filter
Top Products
16
Menu System
continued...
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
a) Preset channels or the VCR channel one by
one to the programme order of your choice.
To do this:
1 After selecting the ”Manual Programme
Preset” option, press then with
Programme option highlighted press .
Press or to select which programme
number you want to preset the channel on
(for VCR, select programme number “0”).
Then press .
2 The following option is only available depending on the country you have selected
in the “Language/Country” menu.
After selecting the System option, press .
Then press or to select the TV Broadcast system (B/G for western European
countries, D/K for eastern European countries L for France or I for United Kingdom).
Then press .
3 After selecting the Channel option, press . Then press the number buttons to enter
directly the channel number of the TV Broadcast or the channel of the VCR signal. If you
do not know the channel number, press or to search for it. When you tune the
desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b) Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press . Next press or to
select a letter, number or “-“ for a blank. Press to confirm this character. Select the other
four characters in the same way. After selecting all the characters, press OK twice to store.
c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the
best possible picture, however you can manually fine tune the TV to obtain a better picture
reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press . Next press or to adjust the fine tuning between -15 and +15.
Finally press OK twice to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/-
buttons.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number you want to skip. When the programme you want to skip
appears on the screen, select the Skip option and press . Next press or to select
Yes. Finally press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e) View and record scrambled channels when using a decoder connected to Scart
3/ 3 directly or through a VCR.
This option is only available depending on the country you have selected in the
“Language/Country” menu.
To do this: select the Decoder option and press . Next press or to select On. Finally
press OK twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
S
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter Menu:
Enter:
Set Up
Select:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
03GBKV28FX66B.fm Page 16 Wednesday, January 15, 2003 5:15 PM