Sony KV-29CL10B Flat Panel Television User Manual


 
11
GB
SOUND ADJUSTMENT
The “Sound Adjustment” menu allows you to
alter the sound adjustments.
To do this: after selecting the item you want to
alter, press , then press / / or
repeatedly to adjust it and finally press OK to
store the new adjustment.
Level 1 Level 2 Level 3 / Function
This menu also contains two submenus as following:
Mode Personal (for individual settings)
Rock
Pop
Jazz
Detail Adjustment
Sound Effect: Off: Normal.
Spatial: Acoustic sound effect.
Auto volume: Off: Volume level changes according
to the broadcast signal.
On: Volume level of the channels will
stay the same, independent of the
broadcast signal (e.g. in the case
of advertisements).
TV Speakers: Off: Sound from external amplifier
connected to the audio outputs
on the rear of the TV set.
On: Sound from the TV set.
Treble and Bass can only be altered if “Personal” mode is selected.
Select Reset and press OK to reset the sound to the factory preset levels.
In case of a bilingual broadcast select Dual Sound and set A for sound channel 1, B for sound
channel 2 or Mono for mono channel if available. For a stereo broadcast you can choose Stereo or
Mono.
continued...
Menu System
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Sound Adjustment
Mode: Personal
Treble
Bass
Balance
Reset
Dual Sound: Mono
Detail Adjustment
OK
Sound Adjustment
Mode: Personal
Treble
Bass
Balance
Reset
Dual Sound: Mono
Detail Adjustment
OK
02GBKV29CL10B.fm Page 11 Friday, January 17, 2003 6:17 PM