Filter
Top Products
29
GB
Problem
No unscrambled picture whilst
viewing an unscrambled channel with
a decoder or a Set Top Box connected
through the Scart connector
3/ 3.
v
,
V
, B and b buttons do not work
in PAP mode.
Remote control does not function.
The standby indicator on the TV
flashes.
S
Solution
• Using the menu system, select the “Features” menu and set “AV3 Output”
to “TV” (see page 15).
• Check that the Decoder or the Set Top Box is not connected on the
scart 2/ 2.
• PAP navigation is only possible in TV mode, please check that Media
Selector is set to TV.
• Check that the Media Selector on the remote control is set to the device
you are using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD even when the
Media Selector has been set correctly, enter the necessary code set as
explained on page 24.
• Replace the batteries.
• Contact your nearest Sony service centre.
• If you continue to experience problems, have your TV serviced by qualified personnel.
• Never open the casing yourself.
Additional Information
01GBKV29FQ86U.fm Page 29 Monday, February 16, 2004 12:32 PM