Filter
Top Products
19
EN
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets D if you wish to amplify the audio
output from TV. Next , using the menu system, select the “Set Up” menu, enter the “Detail Set
Up” menu and set “TV Speakers” to “Off”.
Audio level of the external speakers can be modified by pressing the volume buttons on the
remote control. Also treble and bass settings can be modified through the “Sound
Adjustment” menu.
To enjoy “Dolby Virtual” sound effect through your
Hi-Fi equipment:
Place the speakers of your equipment in front of your
listening position and beside the TV set but keeping a
distance of 50 cm between each speaker and the TV set.
Then by using the menu system, select the menu “Sound
Adjustment”. Next select “Dolby Virtual” on the “Effect”
option.
Using Optional Equipment
1 Connect your equipment to the designated TV
socket, as indicated in the previous page.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press the button repeatedly until the
correct input symbol appears on the screen.
Symbol Input Signals
1 • Audio / video input signal through the rear connector E.
1 • YUV input signal through the rear connector E.
2 • Audio / video input signal through the rear connector F.
2 • YUV input signal through the rear connector F.
3 • Audio/video input signal through the rear connector and .
3 • S Video Input signal through the rear connector . This symbol appears
only if an S Video source has been connected.
4 • Video input signal through the phono socket B and Audio input signal
through C.
4 • S Video Input signal through the front S Video input jack A and Audio
signal through C. This symbol appears only if an S Video source has been
connected.
4 Press button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select 4 or 4
input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of
this manual and select “Dual Sound” “A” on the sound menu screen.
S
S
S
Additional Information
Your sitting position
~50°
Right Hi-Fi
speaker
Left Hi-Fi
speaker
G3
G1
G2
03GBKV32LS65AUS.auto.fm Page 19 Monday, May 6, 2002 11:04 AM