Sony KV-20FS120, KV-24FS120 Flat Panel Television User Manual


 
21
Menus
Using the Audio Menu
Treble
Press
G to decrease the higher pitched sounds. Press g to increase the
higher pitched sounds.
Bass
Press
G to decrease the lower pitched sounds. Press g to increase the
lower pitched sounds.
Balance
Press
G to emphasize the left speaker. Press g to emphasize the right
speaker.
Steady Sound
Use the F or f buttons to highlight one of the following options, then
press to select it.
On: Select to stabilize the volume when changing the channels.
Off: Select to turn Steady Sound Off.
Effect
Use the
F or f buttons to highlight one of the following options, then
press to select it.
Simulated: Simulates theater quality sound for mono programs.
Surround: Simulates theater quality sound for stereo programs.
Off: Provides normal stereo or mono reception.
MTS
Multi-Channel
TV Sound
Use the F or f buttons to highlight one of the following options, then
press to select it.
Stereo: Select when viewing a broadcast in stereo.
Auto SAP: Select to have the TV automatically switch to a Second
Audio Program (SAP) when a signal is received.
Mono:
Select to reduce noise in areas of poor reception
.
Bass
Steady Sound
:
Off
Effect
:
Off
Audio
Treble
MTS
:
Stereo
Balance
Move
Select
End
To access the Audio menu, refer to the following steps:
Press
f to highlight an option, then .
To Display
To Highlight
To Select
Press
to directly select Effect settings (Simulated, Surround, Off).
Press to directly select MTS settings (Stereo, Auto SAP, Mono).
If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output sound,
change your Audio MTS setting to Stereo or Mono.