Filter
Top Products
15
GB
Level 1 Level 2 Level 3 / Function
Menu System
NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set Up”
menu allows you to automatically reduce the picture
noise visible in the broadcast signal.
To do this: after selecting the option, press . Then
press or to select Auto. Finally press OK to
confirm and store.
To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.
AV2 OUTPUT
The “AV2 Output” option in the “Detail Set Up”
menu allows you to select the source to be output
from the Scart connector
2/ in order you can
record from this Scart any signal coming from the
TV or from external equipment connected to the
Scart connector
1/ or front connectors 3
and 3.
If your VCR supports SmartLink, this procedure is
not necessary.
To do this: after selecting the option, press . Then
press or to select the desired output signal:
TV, AV1, AV3 or AUTO.
Notes:
If you select “AUTO”, the output signal will always
be the same one that is displayed on the screen.
If you have connected a decoder to the scart
connector
2/ or to a VCR connected to this
scart, please remember to change back the “AV2
Output” to “AUTO” or “TV” for correct
unscrambling.
S
S
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
2829cl11kGB.fm Page 15 Wednesday, January 7, 2004 5:04 PM