Filter
Top Products
34
Operating Instructions
Using the Timer Menu
Current
Time
With the menu open:
1 Press F or
f to select the current time, then press .
(If you are in Daylight Saving time, be sure to set
Daylight Saving to “ON”).
2 Press F or
f to enter the current time, then press .
3 Press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing
With the menu open, set cursor on Timer 1 or Timer 2:
1 Press F or
f to select Timer 1 or Timer 2, then press .
2 Press F or
f to enter your time and channel of
preference, then press .
3 Press to exit the menu.
Daylight
Saving
OFF: Select in fall at the end of Daylight Saving.
ON: Select in spring to compensate for Daylight Saving.
To display
To highlight
To select
Timer 1: Set
Timer 2: Set
Current Time
Daylight Saving: OFF
Video Audio Channel Parent Timer Setup Basic
--
:
--
AM
---
Move Select End
MENU
To access the Timer menu, refer to the following steps:
You must set the Current Time before you can use Timer 1 and Timer 2.
You can set the Timer to ON, OFF, or Set. Once the timer is set, you can turn it
on or off without having to go through the settings.
When you perform Auto Program, all Timer 1 and Timer 2 settings will be
cleared.
Any loss of power will cause Current Time, Timer 1 and Timer 2 settings to be
cleared.