Filter
Top Products
21
Using the TV menu system:
Inputting your personal ID
With this feature, you can allocate a safety code to your TV which will enable you to be traced if the TV is stolen and
recovered. The safety code however can only be entered once - please make a note of it!
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the V button to select the symbol on the menu screen then press B to enter the
‘Set Up’ menu.
3. Press the V button to select ‘Manual Set Up’ on the menu screen then press B to enter the
‘Manual Set Up’ menu.
4. Press the V button to select ‘Personal ID’ on the menu screen then press B to enter the
‘Personal ID’ sub menu.
5. Press the v or V buttons to select the first of a total of 11 characters (letter, number + or a
blank) then press B to go to the next character.
6. Repeat step 5 to input all the characters for the code.
7. Press the OK button to store. A status box appears on screen requesting you to re-enter
your code.
8. Press the OK button to store the code or press b to cancel.
9. Press the MENU button to remove the menu from the TV screen.
Presetting and naming input signals
Using this feature you can label input sources.
Manual Set Up
Select. A-Z, 0-9: Store: OK
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID
- - - - - - -
AV Preset
Select: Enter:
AV 1
AV 2
AV 3
AV 4
AV 1
AV 2
AV 3
AV 4
INPUT LABEL
AV Preset
Select:
Confirm: OK
AUTO FORMAT
On
On
On
On
AV 1
AV 2
AV 3
AV 4
INPUT LABEL
AUTO FORMAT
AV Preset
Select: A-Z, 0-9:
Confirm: OK
AV 1
AV 2
AV 3
AV 4
INPUT LABEL
AUTO FORMAT
AV 1
AV 2
AV 3
AV 4
On
On
On
On
Next:
Off
On
On
On
AV 1
AV 2
AV 3
AV 4
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set
Up’ menu.
3. Press the V button to select ‘AV Preset’ on the menu screen then press B to enter the ‘AV
Preset’ menu.
4. Press the v or V buttons to select the desired AV input (AV1, 2, 3 or 4)..
5. Press the B button to select ‘AUTO FORMAT’ then press the v or V buttons to select
‘Off’, ‘Normal’ or ‘Full’.
6. Press the B button to select ‘LABEL’.
7. Press the v or V buttons to select the first character of the name then press the B button to
move to the next character.
8. Repeat step 7 to select the other 4 characters then store by pressing the OK button.
9. Repeat steps 4-8 for the other AV input sources then press the MENU button to remove the
menu from the TV screen.