Filter
Top Products
11
SETUP Setup SETUPSETUP SETUPSETUP
Item Description
1 MEMORY STICK Memory Stick insertion slot. For details, see “Using the Memory Stick Picture
Viewer” on page 53.
2 MEMORY STICK LED When lit, indicates that the Memory Stick is being read. (Do not remove the
Memory Stick when the indicator is lit.)
3 S VIDEO
VIDEO 2 INPUT
Connects to the S VIDEO OUT jack on your camcorder or other video
equipment that has S VIDEO. Provides better picture quality than composite
video (4).
4 VIDEO/L(MONO)-AUDIO-R
VIDEO 2 INPUT
Connects to the composite A/V output jacks on your camcorder or other
video equipment.
5 MENU Press to display the Menu. Press again to exit from the Menu. For details, see
“Using the Menus” on page 63.
6 V v B b Press V v B b to move the on-screen cursor.
7 SELECT Press to select the on-screen highlighted item.
8 TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV’s
video inputs.
9 -VOLUME + Press to adjust the volume.
0 -CHANNEL+ Press to scan through channels. To scan quickly through channels, press and
hold down either CHANNEL button.
qa TIMER LED When lit, indicates one of the timers is set. When the timer is set, this LED
will remain lit even if the TV is turned off. For details, see page 73.
qs STAND BY LED Blinks when the TV is turned on, then shuts off when the picture is displayed.
If the LED blinks continuously, this may indicate the TV needs service (see
“Contacting Sony” on page 80).
qd Infrared Receiver (IR) Receives IR signals from the TV’s remote control.
qf POWER Press to turn on and off the TV.
36_40XBR.book Page 11 Tuesday, April 16, 2002 4:16 PM