35Adjusting Your Setup (MENU)
6
Select the program
position to which you
want to preset a channel.
(1) Make sure the cursor
(”) appears beside PR,
then press ENTER.
(2) Press V/b/v/B until
the program position
you want appears on
the menu, then press
ENTER.
7
Select the desired
channel.
(1) Make sure the cursor
(”) appears beside VHF
LOW, then press
ENTER.
(2) Press V/b/v/B until
the desired channel
picture appears on the
TV screen, then press
ENTER.
To go back to the normal screen
Press MENU.
Notes
• If the TV signal is too strong and the picture is distorted, select
“MANUAL PROGRAM” from the PRESET menu, then select “ATT
(attenuator) ON”.
• The TV system and the ATT (attenuator) settings are memorized for each
program position.
• If you do not know your local TV system, consult your nearest Sony
dealer or authorized service center.
b
b
continued
TV SYS: B/G
VHF
LO
W
PR:01
ATT : OFF
MANUAL PROGRAM
TV SYS: B/G
VHF
LO
W
PR:01
ATT : OFF
MANUAL PROGRAM
ENTER
ENTER
ENTER
ENTER