Filter
Top Products
Getting Started
6
-EN
MANUAL PROGR
COLOR SYSTEM SELECT
TV SYSTEM
AUTO PROGR
POWER
Presetting channels
Presetting channels automatically
You can preset up to 80 TV channels in numerical
sequence from program position 1.
Front of TV
1 Press POWER.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
2 Press TV SYSTEM until your local TV system
appears.
3 Press AUTO PROGR.
To start presetting channels automatically
from the specified program position
1 Press MANUAL PROGR.
2 Press TV SYSTEM to select your local TV system.
3 Press PROGR +/– to select the program position.
4 Press AUTO PROGR.
Presetting channels manually
To change the channel for a particular program
position or to receive a channel with a weak signal,
preset the channel manually.
1 Press MANUAL PROGR.
2 Press PROGR +/– until the required program
position appears on the screen.
3 Press TV SYSTEM until your local TV system
appears.
4 Press VOLUME +/– on the TV until the
required channel picture appears on the
screen.
5 Press MANUAL PROGR.
If the TV system is not properly selected
The color of the picture may be poor and/or the sound
may be noisy. In this case, select the appropriate TV
system.
1 Press PROGR +/– to select the program position.
2 Press TV SYSTEM until the picture and sound
become normal.
Notes
• If you do not know your local TV system, consult your nearest
authorized service center or dealer.
• The setting of the TV SYSTEM is memorized for each program
position.
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
1 Press PROGR +/– until the unused or
unwanted program position appears on the
screen.
2 Press MANUAL PROGR.
3 Press PIC MODE on the remote commander.
4 Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
TV SYSTEM
B/G I D/K M
AUTO PROGR
1 2 3 1
1
32
POWER