Sony PCS-1/1P VCR User Manual


  Open as PDF
of 2
 
3-863-988-11 (1)
© 2004 Sony Corporation Printed in Japan
Video Communication System PCS-1/1P
Connection Sheet (LAN Connection)
System Setup
2
Connect the camera.
Connect the Camera Unit and Communication
Terminal using the supplied camera cable.
3
Connect the Data Solution Box.
Connect the Data Solution Box and Communication Terminal using the
cable supplied with the Data Solution Box.
4
Connect the LAN cable.
Connect the Communication Terminal to a
LAN using a LAN cable (not supplied).
DC 19.5V
AUDIO OUT
AUDIO IN
AUX1–VIDEO IN–AUX2
CAMERA UNIT MIC
(PLUG IN POWER)
ISDN UNIT WHITE
BOARD
(MIXED)
AUX
MAIN
–
MONITOR
–
SUB
VIDEO OUT
RGB OUT DSB
IR OUT
100BASE-TX
10BASE-T
12
12
AUXMIC 1 MIC 2 MIC 3 MIC 4 MIC 5 TO PROCESSOR RGB OUTOUTLINE OUT IN
TERMINAL VISCA OUT
1 TV monitor**
2 Camera Unit
Communication Terminal
PCS-P1/P1P
3 Data Solution Box
PCS-DSB1**
4 LAN cable**
5 AC adaptor
Power cord*
PCS-AC195*
LAN
1
Connect the TV monitor.
Connect the TV monitor and Communication Terminal
using the supplied audio cable and S-video cable.
• When connecting a second monitor,
use the VIDEO OUT MONITOR
SUB or the RGB OUT connector on
the Communication Terminal, or the
RGB OUT connector on the Data
Solution Box. For details, refer to the
Operating Instructions.
• The AUDIO OUT (MIXED) jack is
used to make an audio recording of
a conference. This is not used
during regular conferences.
DC 19.5V
N
CAMERA UNIT MIC
(PLUG IN POWER)
ISDN UNIT
WHITE
BOARD
DSB
IR OUT
100BASE-TX
10BASE-T
12
12
5
Connect the AC adaptor.
Connect the supplied AC adaptor to the Communication
Terminal, and then plug the power cord into a wall outlet.
AC adaptor*
to a wall outlet
(100 -240V AC)
Power cord*
PCS-C1/C1P*
Let’s connect
Used with the Data Solution Box for the first time, the Communication Terminal may
automatically upgrade the software of the Data Solution Box. While the upgrading message
is displayed on the monitor screen, be sure not to turn off the Communication Terminal.
Doing so may cause malfunction of the system.
AUDIO IN
CAMERA UNIT
M
(PLUG
RGB OUT
IR OUT
100BASE-TX
10BASE-T
12
1
MIC 1 MIC 2 MIC 3 MIC 4 MIC 5 TO PROCESSOR RGB OUT
Interface cable
(supplied with the PCS-DSB1)
Data Solution Box
AUDIO IN
CAMERA UNIT
M
(PLUG
RGB OUT
IR OUT
100BASE-TX
10BASE-T
12
1
TERMINAL VISCA OUT
Camera cable*
Camera Unit
Communication
Terminal
DC 19.5V
N
CAMERA UNIT MIC
(PLUG IN POWER)
ISDN UNIT
WHITE
BOARD
DSB
IR OUT
100BASE-TX
10BASE-T
12
12
UTP cable
(category 5, straight)**
to LAN
* supplied
** not supplied
•Be sure to turn off all the equipment
before making any connections.
•Do not connect/disconnect the camera
cable with the power on. Doing so may
damage the Camera Unit or
Communication Terminal.
* supplied
* supplied
Communication
Terminal
* supplied
Communication
Terminal
** not supplied
Communication
Terminal
* supplied
Notes
AUDIO OUT
AUDIO IN
AUX1–VIDEO IN–AUX2
(MIXED)
AUX
MAIN
–
MONITOR
–
SUB
VIDEO OUT
RGB OUT
S-VIDEO INAUDIO IN
LR
S-video cable*
Audio cable*
TV monitor
Communication
Terminal
For safety, do not connect the 100BASE-TX/10BASE-T
connector to a network that applies an excess voltage via
the 100BASE-TX/10BASE-T connector.