Filter
Top Products
37 (GB)
To set the change to the standby mode at the
END TIME
1 After selecting AUTO for PIC INVERSION
mode, select POWER OFF and press ENTER.
The following menu appears on the display panel.
ENTER
MENU
PIC INVERSION : AUTO
POWER OFF : NO
SELECT SET END
2 Select YES with
v
/
V
and press MENU.
The display changes to standby mode at the
designated END TIME.
Notes
• The power off function, power saving function and
on/off timer function in the POWER CONTROL
menu cannot be used simultaneously. When one of
those functions is set to ON (YES), “– – – –” appears
next to the others and their functions are not
available.
• If you set START TIME and END TIME to the same
time, the setting of START TIME takes priority over
that of END TIME. The display image does not
return to the original image at the END TIME.
Changing the Image Position
Automatically
1 In the SCREEN SAVER menu, press
v
/
V
to
move the cursor (B) to “PIC ORBITING” and
press ENTER.
The following menu appears on the display panel.
ENTER
MENU
PIC ORBITING
ORB I T I NG : OFF
ORB I T RANGE : 5do t
ORB I T CYCLE : 10sec
SELECT SET END
Reducing Afterimage/Ghosting (Screen Saver Function)
When you select AUTO, the following menu
appears.
ENTER
MENU
PIC INVERSION : AUTO
START TIME : 16 :30
END T IME : 16 : 45
POWER OFF : NO
SELECT ADJUST END
(1) Press ENTER.
The cursor (B) appears on the display panel.
(2) Press
v
/
V
to move the cursor (B) to
“START TIME” and press ENTER.
The following menu appears and the
background of the hour is displayed in cyan.
ENTER
MENU
PIC INVERSION : AUTO
START TIME : 16 :30
SELECT SET END
(3) Set the hour when the image is to be reversed
with
v
/
V
and press ENTER.
The setting for the hour is entered and the
background of the minute is displayed in cyan.
(4) Set the minute with
v
/
V
and press MENU.
The setting for the minute is entered and the
menu returns to the PIC INVERSION menu.
(5) Similarly, set the time when the PIC
INVERSION function is to be cancelled.
The display image will be reversed at the
START TIME and will return to the original
display image at the END TIME. This cycle is
carried out automatically once a day.