Filter
Top Products
92
HQ Setting
Selects the HQ mode used for recording on
the HDD (page 40).
DVD Rec. Settings
Bilingual Recording (for all recordable
discs except DVD-RWs/DVD-Rs in VR mode)
Selects the sound to be recorded on the
recordable disc. This setting is not necessary
when recording on DVD-RWs/DVD-Rs (VR
mode) that record both the main and sub
sounds.
Timer Settings
Rec Mode Adjust
Auto Title Erase (HDD only)
TV Direct Rec (HDD/DVD+RW/DVD-RW/
DVD+R/DVD-R only)
Synchro Rec
Selects the recording destination used for
Synchro-Recording (page 49).
Auto Chapter
Selects whether to automatically divide a
recording (a title) into chapters during
recording or dubbing.
b Notes
• The actual chapter mark interval may vary
depending on the amount of information
contained in the video to be recorded.
• Chapter marks are automatically inserted where
the recordings start on the tape when “Auto
Chapter” is set to “On” during DV dubbing to the
HDD or a DVD-RW/DVD-R (VR mode).
HQ+ Records in higher quality
(approximate 15 Mbps).
HQ Records in the standard HQ
mode.
Main
Records the main sound for
the bilingual programme.
Sub Records the sub sound for the
bilingual programme.
On Automatically adjusts the
recording mode to enable the
entire programme to be
recorded (page 43).
Off Turns off the function.
On Automatically erases old
titles recorded on the HDD
(page 43).
Off Turns off the function.
On Allows you to easily record
what you are watching on the
TV using SMARTLINK.
Off Turns off the TV Direct Rec
function.
Record to
HDD
Records to the HDD.
Record to
DVD
Records to DVDs.
On
Inserts chapter marks at
approximately 6 minute
intervals.
Off No chapter mark is inserted.