Filter
Top Products
5
Location of Parts and Basic Remote Operations
* The setting cannot be changed.
See the table on page 10 for information on the buttons
that you can use to control each component.
1 SLEEP button
Press repeatedly to activate the sleep function and the
duration which the receiver turns off automatically.
2 AV ?/1 switch
Press to turn the selected audio and video components
under the function button, on or off.
If you press the ?/1 switch (3) at the same time, it
will turn off the main component and other Sony
audio/video components (SYSTEM STANDBY).
Note
The function of the AV ?/1 switch changes automatically
each time you press the function buttons (4). Depending on
the component, the above operation may not be be possible
or may operate differently than described.
3 ?/1 switch
Press to turn the receiver on or off.
4 Function buttons
Press one of the buttons to select the component you
want to use. When you press a button, the receiver
turns on. The components are factory assigned to the
buttons as follows. When you want to assign other
components, program the remote following the steps
on page 12.
Assigned component(s)
VCR(VTR mode 3)
VCR(VTR mode 1)
VCR(VTR mode 2)
DVD player
TV tuner
—
MD deck
CD player
Built-in tuner*
Turntable*
DVD player
TV tuner
Button(s)
VIDEO1
VIDEO2
VIDEO3
DVD/LD
TV/SAT
AUX
MD/TAPE
CD
TUNER
PHONO
5.1 CH
TV CONTROL
Note that the function buttons are factory-set as
described in the table above. If you want to change
the factory setting of the buttons to match your
particular components, do the procedure “Changing
the Factory Setting of a Function Button” on page 12.
Note
After you have selected VCR or DVD player, turn on the TV
and set the TV’s video input to match the component you
selected.
5 TV CONTROL button
If you are using a TV, you can use this remote to
operate the TV without turning on the receiver. When
you are using a Sony TV, pressing this button turns on
the TV and switches to TV input.
6 MASTER VOLUME +/– buttons
Press to adjust the volume level of all speakers at the
same time.
7 MUTING button
Press to mute the sound. The MUTING indicator on
the receiver lights up when the sound is muted.
8 SOUND FIELD buttons
A.F.D. button
Press to set the receiver to automatically select the
appropriate sound field for the input signal.
This button can be used only with receivers that have
digital inputs.
2CH button
Press to turn the sound field off and listen to 2 channel
stereo sound.
Multi channnel source is also downmixed to a 2
channel stereo sound.
MODE button
Press to select sound fields.
ANALOG DIRECT button
Press to listen to an analog source without digital
processing by the equalizer, sound field, etc.
CINEMA STUDIO button
Press to select CINEMA STUDIO in the sound field
menu.
9 BASS BOOST button
Press to increase the bass of the front speakers. The
BASS BOOST indicator on the receiver lights up when
the function is turned on.