Filter
Top Products
34
GB
When you turn the TV off by using the POWER
button on the TV’s remote, the stand and the
connected components turns off automatically.
• If the TV is turned off and enters standby mode, the
power consumption of the stand will be reduced when
the power saving function is on.
• Depending on the status, the connected components
may not be turned off. For details, see operating
instructions supplied with the connected components.
If a “BRAVIA” Sync-compatible TV is
connected to the stand, and the stand is in active
standby mode, if the TV is turned off, HDMI
signal transmission stops, and power
consumption is reduced.
1 Press AMP MENU.
2 Press X/x repeatedly until “SET HDMI”
appears, then press or c.
3 Press X/x to select “POWER SAVE,”
then press or c.
4 Press X/x to select the setting.
• ON: Reduces power consumption in
active standby mode. HDMI signal
transmission occurs only when the
TV is on.
• OFF: No reduction. HDMI signal
transmission occurs continuously
even if the stand is turned off (active
standby mode).
5 Press AMP MENU.
The AMP menu turns off.
Turning off the stand, TV
and the connected
compornents
(System Power Off)
Tip
Note
Using the power saving
function
VOLUME
MUTING
TUNING
-
PRESET
-
NIGHT
DISPLAY
CENTER SUBWOOFER
INPUT SELECTOR
AMP MENU
LEVEL
DIMMER
TUNING
+
PRESET+
RETURN
MENU
SOUND FIELD
AMP
MENU
C, X, x, c,