Sony RM-LP204M Universal Remote User Manual


 
15
Using the Lists
If you selected the tape deck
Move the easy scroll key to display the information about
deck A or B.
Note
When the remote is programmed to control a non-Sony tape
deck, the following may occur:
— The information about deck B is not displayed and you
cannot switch between tape deck A and B.
— “TAPE A/B” is displayed and tape deck A and B switch
automatically each time you press the easy scroll key, etc.
If you selected the 2ND AUDIO source
Move the easy scroll key to select the source of 2ND
AUDIO, then press the key.
Note
Depending on the component you are using, the component may
not have the “2ND AUDIO” function. For details, refer to the
Operating Instructions supplied with your receiver.
Selecting a Sound Field
Do the procedure below to select a sound field from the
sound field list. Note that the sound fields contained in
each list will vary depending on the receiver.
1 Press SOUND FIELD.
The sound field list appears.
Stadium
Game
Jazz
2 Move the easy scroll key to select the sound field,
then press the key to enter the selection.
A display example
CINEMA EX. A
CINEMA EX. B
CINEMA EX. C
To turn off the sound field
Move the easy scroll key to select either “2CH STEREO”
or “A.F.D.” in the sound field list in the display.