Filter
Top Products
102
2Press the function key you want to
refer to.
For example, press the [TV POWER]
key.
3 The function key for reference is set to the Alias key, and the
display returns to step 5 for other Alias key settings.
When you create an Alias key, a new Alias key is added to the last
page of the Component display.
■ If “The selected key will cause a circulated reference.
The key cannot be programmed.” is displayed
The action programmed for the selected reference key/button will cause
a circulated reference. The key/button cannot be programmed for the
Alias key.
For details on the circulated reference, see “About the circulated
reference” below.
Notes
• Keys that you cannot select as the reference key for an Alias appear pressed and
cannot be selected. If you press one of these keys, a beep sounds twice.
• If you press the function button to which you cannot set Alias, a beep sounds
twice.
8
To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
About the circulated reference
The circulated reference is caused when keys refer to each other by the Alias setting and
the operation procedure becomes looped and endless. For example, if you set a macro
procedure of Key A to Key B and a macro procedure of Key B to Key A, the two keys refer
to each other and the operation will be looped and endless.
On this Remote Commander, when you select keys that refer to each other, a message
appears to prevent the circulated reference.
Customizing the Component display (COMPONENT EDIT)
Continued